Cooling & Ventilation

The Cool-It II™ Top-Mounted Component Cooler

Ideal for amps, receivers and almost anything else that could overheat in a system
Easy to install; just center the unit above the heat sinks and plug the power supply into an AC outlet
A soothing stream of cool air quietly flows down and between the heat sink fins lowering the temperature to more tolerable levels
Removes excess heat and prevents damage
Inexpensive option to extend useful life of components
Includes power supply and thermal switch
1-year warranty

Price: $87.95

Buy Now

Cool-Stick™ - 36"

(16) 50mm fans wired in 2 groups each having own thermal switch and power supply to provide a high level of airflow
Airflow: 60CFM free air, 15CFM typical
Noise level: 19dB
36" W x 2 3/8" H x 3/4" D
Includes: adjustable mounting brackets and mini power supplies

Price: $205.95

Buy Now

The Cool-Stack ll™ Rack-Mounted Ventilating System

Has a total of 3 temperature-controlled fan speeds and is installer-programmed to adjust automatically as the rack temperature changes
Heated air is vented through the perforated front panel or through alternative exhaust ports on the top or rear panels
High-quality tubing and fittings are supplied with each Cool-Stack II to channel hot air from its exhaust ports to nearby closets, attics, or other selected spaces
Ships in 2 boxes
Includes: power supply, thermal switch, two 4' lengths of 2" tubing, one 8' length of 4" tubing and mounting clamps, brackets and screws
1-year warranty

Price: $399.95

Buy Now

The Cool-Cube™ Enclosure Cooling System - 4" Flex Tubing

When space is really tight- combines compact power module with 8' of flex tubing
Power module is controlled by a 2-stage thermal switch that turns the power module on at low speed at 90ºF and switches it to high speed at 100ºF
Good for mid-size cabinets, small closets or enclosed video projectors to pull hot air out of enclosures
Includes: Power supply, blower switch, 8' of insulated tubing, hot air collector, required clamps and screws

Price: $229.95

Buy Now

Cool Line I™ - Maple Intake - 1 Fan Motor

Constructed of maple
Used in narrow spaces
1 temperature controlled multi-speed motor
Fans designed for intake mode
Overall: 15 1/4" W x 3 3/8" H x 3 1/2" D; cutout: 13 3/4" W x 2 1/8" H
Includes control box with thermistors and power supply

Price: $197.95

Buy Now

The Cool-Cube™ Enclosure Cooling System - 3" Flex Tubing

When space is really tight- combines compact power module with 8' of flex tubing
Power module is controlled by a 2-stage thermal switch that turns the power module on at low speed at 90ºF and switches it to high speed at 100ºF
Good for mid-size cabinets, small closets or enclosed video projectors to pull hot air out of enclosures
Includes: Power supply, blower switch, 8' of insulated tubing, hot air collector, required clamps and screws

Price: $223.95

Buy Now

Dual-Mode Component Cooler™

Easily reconfigured, it can be placed beneath a component with bottom panel vent openings
Not for use in sealed enclosures; works best in areas with restricted (but not zero) ventilation
Cools from the bottom or the top
Shipped in heat shield mode to be placed on top of hot components
Easily converts to bottom-mounted component cooler mode
Includes 1-year warranty, thermal switch and power supply

Price: $138.95

Buy Now

Cool Line I™ - Aluminum - 1 Fan Motor

Constructed of anodized aluminum
Used in narrow spaces
1 temperature controlled multi-speed motor
Shipped in exhaust mode, can be easily changed to intake mode
Overall: 15 3/8" W x 3 1/2" H x 4 1/2" D; cutout: 14 1/4" W x 2 1/2" H
Includes: control box with thermistors, power supply, blanking plate, planking plate screws and intake fan mounting board

Price: $160.95

Buy Now

The Cool-Stack I™ Exhaust

Mounts in an equipment rack (either at the very top or above the hottest component) and pulls the heated air up and out through its front panel
4 fans on the underside turn slowly making virtually no noise as they exhaust heated air through its 8 vents
I-RU high true rack-mounted ventilator
Dimensions: 19" W x 8" D x 1 3/4" H
Requires unobstructed intake and exhaust openings: will not work if there are doors on the rack
Includes: remote thermal switch, 12V trigger and power supply
1-year warranty

Price: $199.95

Buy Now

System 3 Enclosure Cooling System

Quiet cooling on a budget
Perfect for smaller enclosures of 8 to 10 cubic feet like a receiver and 1 or 2 other components in a small cabinet
Moves 15 to 20 cubic feet of air per minute and replaces the air typically twice a minute
Easy to install and can either be arranged to pull cool air in or push heated air out
Allows installers to give clients the protection they deserve
Dimensions: control box 3” W x 1” D x 2” H; fan(s) 3 1/8” sq.
Includes: two 80mm fans and fan guards, plug-type power supply, thermal switch and terminal strip pre-mounted in a small box for interconnections
1-year warranty

Price: $83.95

Buy Now

System 1 Cooling System

This flexible heat problem-solving device is an extraordinarily quiet air mover that can be mounted to almost any enclosure
Comes complete with tubing that is compatible with tubing-to-surface adapters of different sizes (6” square to 14” square)
Designed to move over 100 cubic feet of hot air per minute
Uses a Swiss-made precision-balanced impeller produces little sound, even at full speed (as measured by ISO standard 3744, it’s 8dB quieter than industrial supply bathroom ventilators)
Suitable for indoor use, in any position
Fan can push or pull air- or do both
3-year warranty
Includes: fan, 8’ of acoustically insulated flexible tubing, mounting brackets, clamps and a 6” square hot air collector

Price: $348.95

Buy Now

System 2 Cooling Kit

For cooling mid-size enclosures
Low-cost, simple to install, quiet venting solutions
Fan speed is proportional to temperature rise
System consists of kit of "separates"
Ideal for "building-in" to an enclosure in the planning stage
Long lines for easy, no soldering installation
Includes: 1 control module, 1 power supply, two 120mm fans, two 120mm fan guards, 2 temperature sensing thermistors
1-year warranty

Price: $187.95

Buy Now

Mini Headend Power Supply And Combiner/Cooling System

Switching power supply 90-265Vac
5-860MHz bandwidth high isolation combiner
Auxillary AC output
UL-approved swithching power supply
19" W x 1 3/4" H x 9" D

Price: $597.95

Buy Now

Cool Line II™ - Aluminum - 2 Fan Motors

Constructed of anodized aluminum
Used in narrow spaces
2 temperature controlled multi-speed motors
Shipped in exhaust mode, can be easily changed to intake mode
Overall: 30 1/4" W x 3 3/8" H x 4 1/2" D; cutout: 29 1/8" W x 2 1/2" H
Includes: control box with thermistors, power supply, blanking plate, planking plate screws and intake fan mounting board

Price: $202.95

Buy Now

Cool Line II™ - Maple Intake - 2 Fan Motors

Constructed of maple
Used in narrow spaces
2 temperature controlled multi-speed motors
Fans designed for intake mode
Overall: 30" W x 3 1/2" H x 3 1/2" D; cutout: 28 1/4" W x 2 1/8" H
Includes control box with thermistors and power supply

Price: $223.95

Buy Now

Ideal for amps, receivers and almost anything else that could overheat in a system
Easy to install; just center the unit above the heat sinks and plug the power supply into an AC outlet
A soothing stream of cool air quietly flows down and between the heat sink fins lowering the temperature to more tolerable levels
Removes excess heat and prevents damage
Inexpensive option to extend useful life of components
Includes power supply and thermal switch
1-year warranty

(16) 50mm fans wired in 2 groups each having own thermal switch and power supply to provide a high level of airflow
Airflow: 60CFM free air, 15CFM typical
Noise level: 19dB
36" W x 2 3/8" H x 3/4" D
Includes: adjustable mounting brackets and mini power supplies

Has a total of 3 temperature-controlled fan speeds and is installer-programmed to adjust automatically as the rack temperature changes
Heated air is vented through the perforated front panel or through alternative exhaust ports on the top or rear panels
High-quality tubing and fittings are supplied with each Cool-Stack II to channel hot air from its exhaust ports to nearby closets, attics, or other selected spaces
Ships in 2 boxes
Includes: power supply, thermal switch, two 4' lengths of 2" tubing, one 8' length of 4" tubing and mounting clamps, brackets and screws
1-year warranty

When space is really tight- combines compact power module with 8' of flex tubing
Power module is controlled by a 2-stage thermal switch that turns the power module on at low speed at 90ºF and switches it to high speed at 100ºF
Good for mid-size cabinets, small closets or enclosed video projectors to pull hot air out of enclosures
Includes: Power supply, blower switch, 8' of insulated tubing, hot air collector, required clamps and screws

Constructed of maple
Used in narrow spaces
1 temperature controlled multi-speed motor
Fans designed for intake mode
Overall: 15 1/4" W x 3 3/8" H x 3 1/2" D; cutout: 13 3/4" W x 2 1/8" H
Includes control box with thermistors and power supply

When space is really tight- combines compact power module with 8' of flex tubing
Power module is controlled by a 2-stage thermal switch that turns the power module on at low speed at 90ºF and switches it to high speed at 100ºF
Good for mid-size cabinets, small closets or enclosed video projectors to pull hot air out of enclosures
Includes: Power supply, blower switch, 8' of insulated tubing, hot air collector, required clamps and screws

Easily reconfigured, it can be placed beneath a component with bottom panel vent openings
Not for use in sealed enclosures; works best in areas with restricted (but not zero) ventilation
Cools from the bottom or the top
Shipped in heat shield mode to be placed on top of hot components
Easily converts to bottom-mounted component cooler mode
Includes 1-year warranty, thermal switch and power supply

Constructed of anodized aluminum
Used in narrow spaces
1 temperature controlled multi-speed motor
Shipped in exhaust mode, can be easily changed to intake mode
Overall: 15 3/8" W x 3 1/2" H x 4 1/2" D; cutout: 14 1/4" W x 2 1/2" H
Includes: control box with thermistors, power supply, blanking plate, planking plate screws and intake fan mounting board

Mounts in an equipment rack (either at the very top or above the hottest component) and pulls the heated air up and out through its front panel
4 fans on the underside turn slowly making virtually no noise as they exhaust heated air through its 8 vents
I-RU high true rack-mounted ventilator
Dimensions: 19" W x 8" D x 1 3/4" H
Requires unobstructed intake and exhaust openings: will not work if there are doors on the rack
Includes: remote thermal switch, 12V trigger and power supply
1-year warranty

Quiet cooling on a budget
Perfect for smaller enclosures of 8 to 10 cubic feet like a receiver and 1 or 2 other components in a small cabinet
Moves 15 to 20 cubic feet of air per minute and replaces the air typically twice a minute
Easy to install and can either be arranged to pull cool air in or push heated air out
Allows installers to give clients the protection they deserve
Dimensions: control box 3” W x 1” D x 2” H; fan(s) 3 1/8” sq.
Includes: two 80mm fans and fan guards, plug-type power supply, thermal switch and terminal strip pre-mounted in a small box for interconnections
1-year warranty

This flexible heat problem-solving device is an extraordinarily quiet air mover that can be mounted to almost any enclosure
Comes complete with tubing that is compatible with tubing-to-surface adapters of different sizes (6” square to 14” square)
Designed to move over 100 cubic feet of hot air per minute
Uses a Swiss-made precision-balanced impeller produces little sound, even at full speed (as measured by ISO standard 3744, it’s 8dB quieter than industrial supply bathroom ventilators)
Suitable for indoor use, in any position
Fan can push or pull air- or do both
3-year warranty
Includes: fan, 8’ of acoustically insulated flexible tubing, mounting brackets, clamps and a 6” square hot air collector

For cooling mid-size enclosures
Low-cost, simple to install, quiet venting solutions
Fan speed is proportional to temperature rise
System consists of kit of "separates"
Ideal for "building-in" to an enclosure in the planning stage
Long lines for easy, no soldering installation
Includes: 1 control module, 1 power supply, two 120mm fans, two 120mm fan guards, 2 temperature sensing thermistors
1-year warranty

Switching power supply 90-265Vac
5-860MHz bandwidth high isolation combiner
Auxillary AC output
UL-approved swithching power supply
19" W x 1 3/4" H x 9" D

Constructed of anodized aluminum
Used in narrow spaces
2 temperature controlled multi-speed motors
Shipped in exhaust mode, can be easily changed to intake mode
Overall: 30 1/4" W x 3 3/8" H x 4 1/2" D; cutout: 29 1/8" W x 2 1/2" H
Includes: control box with thermistors, power supply, blanking plate, planking plate screws and intake fan mounting board