The Powermax VBox-X (VBox 10) is the latest actuator positioner & controller on the market. Released June 2010, it uses the latest software to accurately translate and convert DiSEqC1.2 commands from your satellite receiver to 36V power to drive your actuator arm in or out (East/West). Use it with any DiSEqC1.2 satellite receiver and automatically drive the actuator arm to the specific location of the satellite without having to use the remote control supplied by the positioner controller. Your receiver is not DiSEqC enabled? That's OK. Simply use the remote control supplied with the VBox-X to drive the actuator east or west. Use it with any satellite receiver, or as a stand alone controller. The unit comes with a full 1-year warranty honored directly by WS International.
Features:
Compatible with any satellite receiver, including FTA receivers or 4DTV receivers
Compatible with any Actuator & H-H motor
3 Digit LED Display
Drive Dish up to 3M(Optional:5M)
99 Satellite Positions
Fine-tune West & East Buttons
Professional Remote Control
Overload Protection (Auto-recovery)
Anti-Noise Design
Technical Specifications
Demodulation
Wave form
QPSK
Symbol Rate
2~45Msps
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Video Encoder
MPEG-2
MPEG2 MP@ML
Data Rate
15 Mbits/s
Video Standard
NTSC
Aspect Ratio
4:3, 16:9
Processor & Resources
Processor
ALI STi 5119
SDRAM
16 Mbyte
Flash
2 Mbyte
EEPROM
64 Kbit
LNB Input
Connector
IEC 169-24, F type
Input Frequency
950 ~ 2150MHz
LNB Voltage
13/18V DC
Tone Switch
22KHz
S-VHS
S-Video OUT
Component
Y, Pb, Pr OUT
12V Switch
S/W Controlled
0/12V
Current
50 mA MAX
SPDIF
Coaxial
NONE
Optical
Audio Output
2X RCA L/R
Video Output
RCA
RF Modulator
Output
Channel
3/4 Switchable
RS232 Port
D-SUB type
Speed
115,200 bps
Power Supply
Type
SMPS
Input Voltage
AC100v - 240V ~ 25w 50/60Hz
Front Panel
Buttons
7 (up,down,left,right,OK,menu,power)
Connectors
S-Video
RS232C
Mechanical
Dimensions
300x220x63 cm
Weight
2 kg